CF MOTO CF500-5, Service Manual

Page: 231 / 254

12 Ignition System
12
12
12 12 12
12-9
Brush
Check if brush has abnormal damage, crack or
tough in brush carrier block.
Replace brush assy. if any damage.
Commutator
Check if commutator has discoloration, abnor-
mal damage or overwear.
Replace a new commutator if any abnormal
damage.
If there is discoloration on commutator surface,
polish it using sand paper and cleanse it using
clean and dry cloth.
If there is overwear, saw it using saw blade.
Insulator B£¬the distance between B and A is d
Armature Coil
Using multimeter to check if there is connection
among terminals and armature shaft.
Replace a new Armature if the terminals are not
connected or the terminals are connected to the
shaft.
Oil Seal
Check if there is damage or oil leakage on oil seal.
Replace a new oil seal if any damage or oil
leakage.