CF MOTO CF500-5, Service Manual

Page: 150 / 254

6-50
CFMOTO
Assembly
Reverse the removal procedure for installa-
tion and pay attention to the following:
I n s t a l l s h e a v e d r u m 1 £ ¬ r o p e 2 £ ¬ c o i l
spring3£¬Damper4
Wind the rope clockwise around the
sheave drum three times and hook the
rope at “a”of sheave drum.
Warning!The coil spring may quickly unwind
and cause injury when the sheave drum is
opened. Wear proper hand and eye protec-
tion beforehand.
Install coil spring1and sheave
drum2;
Apply lubricant grease to spring;
Hook coil spring end 3 to the starter housing,
wind the coil spring clockwise
Hook the other end 5 of coil spring to hook
part 4 of sheave drum.
Install spring clamp1,friction2
and bolt
Turn sheave drum three times for
pretention of coil spring.
Move the sheave drum 3 to tighten spring.
Install handle1and handle cap2
Lead the rope through the hole of the starter
housing and tie a knot 3 so that the rope
would not be drawn back.
After making a tie4,draw back previous one3.