CF MOTO CF500-5, Service Manual

Page: 208 / 254

10-6
CFMOTO
z
Front axle assembly and adjustment
Item”1” 25Nm
Item”25” 13Nm
Bolt 25Nm
Bolt 25Nm
Item”30” 13Nm
a Use proper washer 8 and 10 thick ness to adjust
gear side clearance between drive pinion gear and dif-
ferential gear,
Drive bevel gear clearance measurement; Install support tools,
tighening bolts(
M10X1.25X60
) put up dial indicator,
make sure 21 mm is between measuring point and support tools.
Turn support tools counter-clock and read the data.
Standard: 0.10-0.25
b
Shift fork and drive clutch assembly should
be against tightly to the arrow shape illustration.
Adjust
washer
thickness
0.1 0.2 0.3 0.4
0.5 1.0
Use fastening glue for item”30”
assembly.
Illustration:
1
8
7
28
29
30
27
25
26
10
3
Tightening Torque