CF MOTO CF500-5, Service Manual

Page: 156 / 254

6-56
CFMOTO
Apply sealant1to the mating face of right
crankcase;
Note:Apply sealant evenly in a
uninterrupted thin line
Install 2 dowel pins2;
Assemble crankcase and tap slightlywith a
rubber for prpter fitting;
Install bolt and tighten to the specified
torque:
M6:10N.m
M8:25N.m
Gear positioning bolt
Place the steel ball and install gear posi-
tioning bolt and tighten the bolt to the speci-
fied torque
Tightening torque:18N.m
Timing chain
Put on timing chain 2
Clutch
Install clutch 1 and nut 2. Tighten the nut to
the specified torque(left thread)
Clutch nut tightening
torque:70N.m
Note: Crankcase bolts should be tightened
diagonally in several steps.
Engine right