CF MOTO CF500-5, Service Manual, Page: 236 / 254

13 Lights,Insturment,Switches
13 13
13 13
13
13-3
Replacing Bulb
Headlight Bulb
Cautions
Headlight bulb will be very hot when it is turned on.
Do not touch it after it is just turned off.
Operation should be done when the bulb is cooled
down.
Remove headlight
(13-5)
Disconnect headlight.
Remove dust-proof cap, headlight connector, circlip
and replace with a new bulb.
Warning:
Wear clean gloves when replacing bulb.
Oil stains on the glass surface may cause
break of bulb. Clean the stained surface with
alcohol or isoamyl acetate.
Make sure that the three pins of the bulb should
be in line with the three positioning holes in the
socket when replacing the bulb.
Bulb specification
£º
12V-35/35W
Reverse the removal procedure for installation
After replacing the bulb, adjust headlight beam
(3-14)
Inspection of Headlight
Turn the ignition switch to ON position,
turn light switch to the illuminating
position and check if the headlight is on.
-ON: Normal
-Still off: short circuit of main cable or
broken main cable