CF MOTO CF500-5, Service Manual

Page: 178 / 254

8 FRONT WHEEL,BRAKE SUSPENSION,STEERING SYSTEM
8 8 8 8 8
8-1
Overhaul
Operation notice
Attention
z The frame must be hold up firmly when overhauling front wheel, suspention system.
z Light,meter,switch overhaul or inspection refers to section10.
z Donot overpower on the tyre, be careful not to destroy the tyre.
z When disassemble the tyre on the rims, to avoid destroy the rim, you required to use special tyre-lever and
rim-protector.
Overhaul standard
Item Standard
Service
limits
Portrait 0.8mm 2.0mm
Rim jump
Cross 0.8mm 2.0mm
Remain
groove
－
3.0mm
Tyre
Air pressure 35kPa
（
0.35kgf
／
cm
2
） －
Front disc Brake lever windage 0mm
－
Tightening torque
steering tie-rod nut 40-50 N.m
steering shaft lock nut 100-120N.m
front wheel shaft nut 110 N.m
suspension fixed bolt/nut 40-50 N.m
rim install nut 50-60 N.m
rim shaft nut 110-130 N.m
Overhaul
……………… ………………8-1
Fault diagnosis ...................................8-2
Front wheel…… …………… …………8-3
Br ake system… ………………………8-4
Front suspension system…………….8-7
Steering system………… ……………8-12