CF MOTO CF500-5, Service Manual

Page: 121 / 254

6-21
6 Engine Removal,Inspection & Installation
6 6
6 6
6
Install thermostat
Install thermostat cover
Install water temperature sensor, apply thread
locker to the thread part, tighten it to the
specified torque.
Install intake pipe, apply lubricant to 0-ring.
Camshaft
Water temperature sensor
Tightening torque: 10 N.¤m
Check camshaft for wear and run-out of
cams and
journals if the engines produces abnormal
noise or
vibration or lacks power output. Any of these
symptoms could be caused by wear of
camshaft.
Note: Do not try to disassemble the camshaft/
automatic decompression assembly. It is not
serviceable.