CF MOTO CF500-5, Service Manual, Page: 206 / 254

10-4
CFMOTO
z
Check if there is damage or crack on the front diffrential gear casecover and
z
bearing assembling hole is ok.Replace casecover if necessary;
z
Check if front axle bearing clearance ok or turning stable,and roll way,steel ball,needle and
plate are ok. Replace bearing if necessary.(Using special tools)
z
Check cylndrical surface of front axle and oil seal lips. Replace broken parts if necessary;
z
Check drive pinion gear and differential gear, inspect worn surface. Replace broken if
necessary;
z
Check driven gears surface,gear(center)differential,bracket differential wearing situation
on the differential gear assembly. Replace parts if necessary;
z
Check inside and out side spline washer wearing status in front axle. Replace parts if
necessary;
z
Check gear motor working status. Replace with new parts if necessary;
Gear motor inspection must be carried out with special equipment or acted on the vehicle;
z
Check other parts. Replace broken parts of necessary.
Inspection after front axle disassembly
z
Check if oil seal lips and O-ring shape are ok. Replace if necessary;