CF MOTO CF500-5, Service Manual

Page: 157 / 254

6-57
6 Engine Removal, Inspection & Installation
6 6
6 6
6
CVT Case
Install dowel pin4¡¢gasket2gasket5£¬intall
CVT case assembly to the right crankcase
Note:
Tighten bolt/nut diagonally
Install bolt12 and nut3
Primary sheave, secondary sheave, drive
belt
Install primary fixed sheave1 as
illustrated on the right;
Install drive belt between secondary sliding/
fixed sheave and tap with a plastic hammer
to keep the belt as low as possible;
Note:
Install the drive belt with
the arrow on the belt turn in
the clockwise direction;
Use a new gasket
D
rive belt contact surface should
be free from any stains
Intall new O-ring6in spacer8
Install spacer8onto the clutch housing shaft,
then install into CVT case7
Note: align oil nick on spacer with oil hole
on the shaft
Install guide palte10and screw11