CF MOTO CF500-5, Service Manual

Page: 170 / 254

6-70
CFMOTO
Drive bevel gear adjustment washer
choosing:
Washer thickness:A=a+d-b-c
a-Drive bevel gear cover marking data£¬minus
from 7.5,eg marking is +02, then a =7.52
b=17.0
c=55.0
d-Thickness marking data on left crankcase
E.g:
If drivel bevel gear cover marking data is +02,
then
a=7.52
b=17.0 c=55.0
If marking data on left crankcase cover is 64.
98,then
d=64.98
A=7.52-17.0-55.0+64.98=0.50
Drive bevel gear provides following spcs of
thickness:
0.15\0.20\0.25\0.30\0.35
So,when the result is just 0 or 5, requirement is
to be met through washer adjustment.If round
sum is not 0 or 5,round integer as follow
mantissa round integer
1,2 0
3,4,6,7 5
8,9 10
Driven bevel gear washer adjustment:
Driven bevel gear washer thickness:
B=e-f+g-h+i-0.05
e-Marking assembly data on driven bevel gear
cover,minus or plus from 76
,
eg. if marking data
is -6, then e= 75.94