CF MOTO CF500-5, Service Manual

Page: 70 / 254

3-23
3.Checks & Adjustment
3 3
3 3
3
-Install oil dip rod, start the engine and allow it to run
for several minutes at idling speed.
-Turn off the engine and wait for about 3 minutes, and
then check the oil level on the dipstick.
Caution:
The engine oil should be changed when the engine is
warm. If the oil filter should be replaced, replace en-
gine oil at the same time.
Replacing Oil Filter
-Remove relative parts ( see Replacing Engine Oil)
-Remove oil filter
1
with the special tool
-Install washer and drain bolt
-Install new oil filter with the special tool
-Fill engine oil (about 2000ml) and check (see Re-
placing Engine Oil)
Tool: Oil Filter Wrench
Engine Oil Capacity
When replacing oil: 1.9L
When replacing oil filer: 2.0 L
Engine overhaul:2.2 L
Inspection of External Oil Pipe
Check external oil pipe for leakage or damage.
Leakage or Damage: Replace