CF MOTO CF500-5, Service Manual

Page: 182 / 254

8 FRONT WHEEL,BRAKE SUSPENSION,STEERING SYSTEM
8 8 8 8 8
8-5
Brake disc
Disassemble
remove front wheel(8-3)
remove brake caliper(8-4)
take away brake disc together with front wheel hub.
remove brake discs 4pcs nut installed in front wheel
hub.
remove the brake disc.
Inspection:
brake disc thickness: replace when less than 2.5mm.
Installing
Install the brake disc well
Brake disc holding bolt torque:25-30N.m
Hand brake master cylinder, front brake
Disassemble
remove bolt
remove parking lever
Seperate front hand brake master cylinder handlebar,
it is not need to remove the front hand brake master
cylinder if not replace the brake pump assembly.
Attention
Donot use brake tube hang the brake pump,to
prevent front hand brake master cylinder
backdate,so keep installing position, at the same
time, fix it in the handlebar.
Oil tube trend according to Sction 1 cable, wire
traces.
Must keep the oil line smooth.
Complete the brake system installation,brake ef-
fort must be checked.