CF MOTO CF500-5, Service Manual, Page: 160 / 254

6-60
CFMOTO
Install starting driven gear;
Magneto Rotor
Install woodruf key into crankshaft groove
Intall magneto rotor 1
Note:Degrease the tapered part of rotor and
crankshaft. Use nonflammable solvent to
clean off the oily or greasy matter and fully dry
the surfaces.
Left crankcase cover
Install dowel pin 2 and gasket 3
Apply lubricant grease to oil lip
Install left crankcase cover
Install bolts
Note:Use a new gasket
Recoil starter
Install recoil starter 1
Install O-ring 2
Note: Use a new O-ring and apply lubricant
grease to the O-ring
I
nstall washer 3 and bolt 4, tighten to the
specified torque
.
Recoil starter bolt tightening torque:55N.
m