CF MOTO CF500-5, Service Manual

Page: 155 / 254

6-55
6 Engine Removal, Inspection & Installation
6 6
6 6
6
1
2
Install shift cam1and shift fork2
Install low range driven gear to counter
shaft3
Check each part for smooth turning;
Spray adequate engine oil to each part;
Install drive bevel gear and tighten to the
specified torque
Drive bevel gear tightening
torque:32N.m
Install driven bevel gear and tighten to the
specified torque:
Install front output shaft to
right crankcase;
Driven bevel gear tightening
torque:25N.m
Check bevel gear backlash
(Refer to 12-44)
Shift cam, shift fork
Drive bevel gear
Right crankcase
Drive bevel gear
Front output shaft