Yamaha RAPTOR YFM80RT Owner'S Manual Download

Page: 1 / 144

OWNER’S MANUAL

READ THIS MANUAL CAREFULLY!

It contains important safety information.

LIT-11626-18-07

5TH-28199-13

This ATV should not be ridden by anyone under 12 years of age.

YFM80RT

PRINTED IN JAPAN

2004.4-2.0x1

(E)

Improper ATV use can result in SEVERE INJURY or DEATH.

WARNING

ALWAYS USE

AN APPROVED

HELMET AND

PROTECTIVE GEAR

NEVER USE

ON PUBLIC

ROADS

NEVER CARRY

PASSENGERS

NEVER USE

WITH DRUGS

OR ALCOHOL

NEVER operate:

without proper training or instruction.

at speeds too fast for your skills or the
conditions.

on public roads - a collision can occur with
another vehicle.

with a passenger - passengers affect
balance and steering and increase risk
of losing control.

ALWAYS:

use proper riding techniques to avoid
vehicle overturns on hills and rough
terrain and in turns.

avoid paved surfaces - pavement may
seriously affect handling and control.

EBU00438

LOCATE AND READ OWNER’S MANUAL. FOLLOW ALL INSTRUCTIONS AND WARNINGS.

(For replacement manual, call 1-800-532-1558)

YAMAHA MOTOR CO., LTD.

PRINTED ON RECYCLED PAPER

5TH-9-13_Hyoshi 23/3/04 3:45 PM Page 1

Summary of Contents for RAPTOR YFM80RT

















































































































































Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands

Yamaha RAPTOR YFM80RT, Owner'S Manual

Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands