manualshive.com logo in svg

Yamaha RAPTOR YFM80RT, Owner'S Manual

Share
Download
Yamaha RAPTOR YFM80RT Owner'S Manual Download Page 92

7-39

With practice, over a period of time, skill at con-

trolled sliding can be developed. The terrain

should be chosen carefully before attempting

such maneuvers, since both stability and control

are reduced. Bear in mind that sliding maneu-

vers should always be avoided on extremely

slippery surfaces such as ice, since all control

may be lost.

POTENTIAL HAZARD

Skidding or sliding improperly.

WHAT CAN HAPPEN

You may lose control of this ATV. You

may also regain traction unexpectedly,

which may cause the ATV to overturn.

HOW TO AVOID THE HAZARD

Learn to safely control skidding or sliding

by practicing at low speeds and on level,

smooth terrain.

On extremely slippery surfaces, such as

ice, go slowly and be very cautious in

order to reduce the chance of skidding or

sliding out of control.

q

WARNING

 5TH-9-13-2  17/3/04 11:32 AM  Page 7-39

Summary of Contents for RAPTOR YFM80RT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands