Yamaha RAPTOR YFM80RT Owner'S Manual Download

Page: 58 / 144

7-4

RIDE WITH CARE AND GOOD JUDGEMENT

Get training if you are inexperienced.

Beginners should get training from a certified

instructor.

Become familiar with this ATV at slow speeds

first, even if you are an experienced operator.

Do not attempt to operate at maximum perfor-

mance until you are totally familiar with the

ATV’s handling and performance characteristics.

Riding your ATV requires skills acquired

through practice over a period of time.

Take the time to learn the basic techniques well

before attempting more difficult maneuvers.

POTENTIAL HAZARD

Operating this ATV without proper instruc-

tion.

WHAT CAN HAPPEN

The risk of an accident is greatly

increased if the operator does not know

how to operate the ATV properly in differ-

ent situations and on different types of ter-

rain.

HOW TO AVOID THE HAZARD

Beginning and inexperienced operators

should complete the certified training

course offered by Yamaha. They should

then regularly practice the skills learned in

the course and the operating techniques

described in this Owner’s Manual.

For more information about the training

course, contact an authorized ATV dealer

or call 1-800-887-2887.

WARNING

5TH-9-13-2 17/3/04 11:32 AM Page 7-4

Summary of Contents for RAPTOR YFM80RT

















































































































































Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands

Yamaha RAPTOR YFM80RT, Owner'S Manual

Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands