background image

2-2

8

Always avoid operating an ATV on any paved surfaces, including sidewalks, driveways, parking lots

and streets.

8

Never operate an ATV on any public street, road or highway, even a dirt or gravel one.

8

Never operate an ATV without wearing an approved motorcycle helmet that fits properly. You

should also wear eye protection (goggles or face shield), gloves, boots, long-sleeved shirt or jacket,

and long pants.

8

Never consume alcohol or drugs before or while operating this ATV.

8

Never operate at speeds too fast for your skills or the conditions. Always go at a speed that is prop-

er for the terrain, visibility and operating conditions, and your experience.

8

Never attempt wheelies, jumps, or other stunts.

8

Always inspect your ATV each time you use it to make sure it is in safe operating condition. Always

follow the inspection and maintenance procedures and schedules described in this manual.

8

Always keep both hands on the handlebars and both feet on the footrests of the ATV during opera-

tion.

8

Always go slowly and be extra careful when operating on unfamiliar terrain. Always be alert to

changing terrain conditions when operating the ATV.

 5TH-9-13-1  17/3/04 11:32 AM  Page 2-2

Summary of Contents for RAPTOR YFM80RT

















































































































































Reviews: