Yamaha RAPTOR YFM80RT Page 27 Owner'S Manual Download

Page: 27 / 144

4-5

EBU00070

Front brake lever

The front brake lever is located on the right han-

dlebar. Pull it toward the handlebar to apply the

front brake.

1. Front brake lever

EBU00732

Brake pedal and rear brake lever

The brake pedal is located on the right side of

the ATV and the rear brake lever is located on

the left handlebar. Push down on the pedal or

pull the lever toward the handlebar to apply the

rear brake.

POTENTIAL HAZARD

Improper adjustment of the speed limiter

and throttle.

WHAT CAN HAPPEN

The throttle cable could be damaged.

Improper throttle operation could result.

You could lose control, have an accident

or be injured.

HOW TO AVOID THE HAZARD

Do not turn the speed adjuster out more

than 20 mm (0.8 in).

WARNING

5TH-9-13-1 17/3/04 11:32 AM Page 4-5

Summary of Contents for RAPTOR YFM80RT

















































































































































Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands

Yamaha RAPTOR YFM80RT, Owner'S Manual

Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands