Yamaha RAPTOR YFM80RT Page 47 Owner'S Manual Download

Page: 47 / 144

EBU00200

Shifting

This model has a 3-speed forward transmission

with centrifugal automatic clutch. The transmis-

sion allows you to control the amount of power

you have available at a given speed or for start-

ing accelerating, climbing, etc. To shift into neu-

tral, return the throttle lever to its original posi-

tion and repeatedly depress the shift pedal until

it stops.

1. Shift pedal

N. Neutral position

Do not coast for long periods with the engine

off, and do not tow the machine a long dis-

tance. Even with gears in neutral, the trans-

mission is only properly lubricated when the

engine is running. Inadequate lubrication

may damage the transmission.

EBU00205

To start out and accelerate:

1. Release the throttle lever.

Always close the throttle while shifting

gears. Otherwise, damage to the engine and

drive train may result.

2. Shift into first gear and release the shift

pedal.

3. Open the throttle gradually.

6-4

3
2
1

5TH-9-13-1 17/3/04 11:32 AM Page 6-4

Summary of Contents for RAPTOR YFM80RT

















































































































































Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands

Yamaha RAPTOR YFM80RT, Owner'S Manual

Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands