Yamaha RAPTOR YFM80RT Owner'S Manual Download

Page: 69 / 144

Exhaust system

The exhaust system on the ATV is very hot dur-

ing and following operation. To prevent burns,

avoid touching the exhaust system. Park the

ATV in a place where pedestrians or children

are not likely to touch it.

7-15

POTENTIAL HAZARD

Hot exhaust system.

WHAT CAN HAPPEN

Dry grass or brush or other combustible
material accumulated around the engine
area could catch fire. Someone touching
the exhaust system during or after opera-
tion could be burned.

WARNING

HOW TO AVOID THE HAZARD

Do not operate, idle, or park the ATV in dry

grass or other dry ground cover.

Keep the engine area free of dry grass,

brush, or other combustible material. Do

not touch the hot exhaust system. Do not

park the ATV in a place where others might

be likely to touch it.

5TH-9-13-2 17/3/04 11:32 AM Page 7-15

Summary of Contents for RAPTOR YFM80RT

















































































































































Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands

Yamaha RAPTOR YFM80RT, Owner'S Manual

Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands