Yamaha RAPTOR YFM80RT Owner'S Manual Download Page 118

Page: 118 / 144

EBU00356

Cable inspection and lubrication

Lubricate the inner cables and the cable ends. If

the cables do not operate smoothly, ask a

Yamaha dealer to replace them.

EBU00727

Brake and shift pedal/brake lever lubrication

Lubricate the pivoting parts of each lever and

pedal.

8-24

POTENTIAL HAZARD

Damaged control cables.

WHAT CAN HAPPEN

Corrosion can result when the outer cov-

ering of control cables becomes damaged.

Cables can also become frayed or kinked.

Operation of controls could be restricted,

which could cause an accident or injury.

HOW TO AVOID THE HAZARD

Inspect cables frequently. Replace dam-

aged cables.

WARNING

Recommended lubricant:

Yamaha chain and cable lube or

SAE 10W30 motor oil

Recommended lubricant:

Lithium-soap-based grease

(all-purpose grease)

5TH-9-13-3 17/3/04 11:31 AM Page 8-24

Summary of Contents for RAPTOR YFM80RT

















































































































































Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Brands by name

Popular brands

Yamaha RAPTOR YFM80RT, Owner'S Manual

Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Brands by name

Popular brands