Yamaha RAPTOR YFM80RT, Owner'S Manual

Page: 99 / 144

8-5
EBU08682
Engine oil
Engine oil level measurement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes
and stop it.
3. Remove the dipstick and wipe it off with a
clean rag. Insert the dipstick in the filler
hole without screwing it in.
NOTE:
Wait a few minutes until the oil level settles
before checking.
4. Remove the dipstick and inspect the oil
level.
5. The oil level should be between the maxi-
mum and minimum marks. If the level is
low, add oil to raise it to the specified level.
c C
Be sure no foreign material enters the
crankcase.
1. Dipstick 2. Maximum level mark
3. Minimum level mark
Engine oil replacement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes
and stop it.
3. Place a container under the engine.
4. Remove the dipstick and drain bolt to drain
the oil.
5. Inspect the O-ring and replace if damaged.
q
w
e
5TH-9-13-3 17/3/04 11:31 AM Page 8-5