Yamaha RAPTOR YFM80RT Owner'S Manual Download

Page: 45 / 144

6-2

NOTE:

This model is equipped with an ignition circuit

cut-off system.

The engine can be started under the following

conditions.

a. When the transmission is in neutral. At this

time the neutral indicator light should come

on. If the light does not come on, ask a

Yamaha dealer to inspect it.

b. When the transmission is in gear and the

rear brake lever is applied. However, it is

recommended to shift into neutral before

starting the engine.

5. Use the choke lever in reference to the fig-

ure:

Position

: Cold engine start-

ambient temperature below 30°C

(90°F).

Position

: Warming up position.

Position

: Cold engine start-

ambient temperature above 25°C

(80°F) and warm engine start posi-

tion.

a. Choke lever
1. Fully open “ON”

2. Half open (warming up position)

3. Closed “OFF”

CHOKE

OFF

° °

AMBIENT TEMP. / CHOKE LEVER POSITION

5TH-9-13-1 17/3/04 11:32 AM Page 6-2

Summary of Contents for RAPTOR YFM80RT

















































































































































Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands

Yamaha RAPTOR YFM80RT, Owner'S Manual

Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands