Yamaha RAPTOR YFM80RT Owner'S Manual Download

Page: 127 / 144

9-2

5. Rinse the machine off immediately with

clean water and dry all surfaces with a

chamois, clean towel or soft absorbent

cloth.

6. Clean the seat with a vinyl upholstery

cleaner to keep the cover pliable and

glossy.

7. Automotive type wax may be applied to all

painted and chrome plated surfaces. Avoid

combination cleaner-waxes. Many contain

abrasives which may mar the paint or pro-

tective finish.

When finished, start the engine and let it

idle for several minutes.

POTENTIAL HAZARD

Operation with wet brakes after washing.

WHAT CAN HAPPEN

Wet brakes may have reduced stopping

ability, increasing the chance of an acci-

dent.

HOW TO AVOID THE HAZARD

Test the brakes after washing. Apply the

brakes several times at slow speeds to let

friction dry out the linings.

WARNING

5TH-9-13-3 17/3/04 11:31 AM Page 8-33

Summary of Contents for RAPTOR YFM80RT

















































































































































Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands

Yamaha RAPTOR YFM80RT, Owner'S Manual

Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands