manualshive.com logo in svg

Yamaha RAPTOR YFM80RT, Owner'S Manual

Share
Download
Yamaha RAPTOR YFM80RT Owner'S Manual Download Page 86

7-32

CROSSING A SLOPE

Traversing a sloping surface on your ATV

requires you to properly position your weight to

maintain proper balance. Be sure that you have

learned the basic riding skills on flat ground

before attempting to cross a sloping surface.

Avoid slopes with slippery surfaces or rough ter-

rain that may upset your balance.

As you travel across a slope, lean your body in

the uphill direction. It may be necessary to cor-

rect the steering when riding on loose surfaces

by pointing the front wheels slightly uphill. When

riding on slopes be sure not to make sharp turns

either up or down hill.

If your ATV does begin to tip over, gradually

steer in the downhill direction if there are no

obstacles in your path. As you regain proper bal-

ance, gradually steer again in the direction you

wish to travel.

POTENTIAL HAZARD

Improperly crossing hills or turning on

hills.

WHAT CAN HAPPEN

Could cause loss of control or cause the

ATV to overturn.

HOW TO AVOID THE HAZARD

Never attempt to turn the ATV around on

any hill until you have mastered the turn-

ing technique as described in the Owner’s

Manual on level ground. Be very careful

when turning on any hill. Avoid crossing

the side of a steep hill if possible.

When crossing the side of a hill:

Always follow proper procedures as

described in the Owner’s Manual.

Avoid hills with excessively slippery or

loose surfaces.

q

WARNING

 5TH-9-13-2  17/3/04 11:32 AM  Page 7-32

Summary of Contents for RAPTOR YFM80RT

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands