Yamaha RAPTOR YFM80RT Owner'S Manual Download

Page: 36 / 144

5-2

POTENTIAL HAZARD

Failure to inspect the ATV before operat-

ing.

Failure to properly maintain the ATV.

WHAT CAN HAPPEN

Increases the possibility of an accident or

equipment damage.

HOW TO AVOID THE HAZARD

Always inspect your ATV each time you

use it to make sure the ATV is in safe

operating condition.

Always follow the inspection and mainte-

nance procedures and schedules

described in the Owner’s Manual.

WARNING

EBU04762

Front and rear brakes

Brake levers and brake pedal

Check for correct free play in the brake levers

and brake pedal. If the free play is incorrect,

adjust it. (See pages 8-18–8-22.)

Check operation of the brake levers and

brake pedal. They should move smoothly and

there should be a firm feeling when the

brakes are applied. If not, have the ATV

inspected by a Yamaha dealer.

Brake operation

Test the brakes at slow speed after starting out

to make sure they are working properly. If the

brakes do not provide proper braking perfor-

mance, inspect the brake linings for wear. (See

page 8-17–8-18.)

5TH-9-13-1 17/3/04 11:32 AM Page 4-14

Summary of Contents for RAPTOR YFM80RT

















































































































































Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands

Yamaha RAPTOR YFM80RT, Owner'S Manual

Search results

Summary of Contents for RAPTOR YFM80RT

Reviews:

Related manuals for RAPTOR YFM80RT

Brands by name

Popular brands