CF MOTO CF500-5, Service Manual

Page: 69 / 254

3-22
CFMOTO
Inspection of Lubrication System
Replace engine oil and oil filter initially at 20 hours or
250km and every 100 hours or 1000km thereafter.
Inspect the engine oil at every 10 hours.
Check Engine Oil Level
-Keep the engine in a plan position.
-Remove the fixture A, fixture B, then remove the left
side cover 1.
-Remove oil dip rod 2
-Clean oil dip rod, insert oil dip rod but do not tighten
it.
-Take out oil dip rod and check if oil is between upper
and lower limit.
-If the engine oil is insufficient, fill more oil until the
sufficient oil is obtained.
Engine Oil: SAE15W/40 classification SF or SG
Note:
-Keep the engine in a plan position
-Do not tighten oil dip rod when measuring oil level
Replacing Engine Oil
-Remove left side cover 1, oil dip rod 2, drain bolt 3
and washer 4.
-Drain out the engine oil while the engine is still warm.
-Clean oil dip rod, drain bolt and washer with solvent.
-Install washer and drain bolt.
Drain Bolt: 30 N.m
-Fill engine oil. ( about 1900ml)