CF MOTO CF500-5, Service Manual

Page: 168 / 254

6-68
CFMOTO
Install the new gasket 3
Install chain tensioner screw, tighten it to the
specified torque
Chain tensioner screw tightening
torque:8N.m
Valve adjuster cover
Use new rubber gasket and apply grease
Install Valve Inspection Cap
Install valve inspection cap bolt
Spark plug
Install spark plug with special tool and
tighten to the specified torque;
Note: To avoid damage to the cylinder head
thread, screw in the spark plug with hand first,
then tighten it to the specified torque with
spark plug wrench.
Spark plug tightening torque:18N.m
Tool: Spark Plug Wrench
Recoil starter
Install recoil starter
Apply thread locker to the bolts and then
tighten
Engine periphery
Valve inspection cap
Install valve inspection cap
Refer to 2-3 for valve clearance