Chapter V Trigger System
36
Fig. 5.31 Schematic Diagram of Rise/Fall Time
Trigger type
Press down
【
Trigger
】
key of the trigger control area on the front panel, and open the trigger menu.
Fig. 5.32 Rise/Fall Time Trigger Menu
Click [Type] menu key and click [Rise/Fall Time] key in the popup Type menu to select the rise/fall time trigger.
The relevant rise/fall time trigger information
will be displayed on the top right corner of the screen.
Trigger source
Click [Source] menu key, and the Source selection menu will pop up on the right side of the screen. The CH1
CH4 can be made as the source.
Slope
Click [Slope] menu key, and the Slope setup menu will pop up on the right side of the screen:
Fig. 5.33 Rise/Fall Time Slope Setup Menu
Click [Rise] menu key to set the slope to Rise;
Click [Fall] menu key to set the slope to Fall;
Click [Rise/Fall] menu key to set the slope to Rise/Fall.
Trigger When
Click [Trigger When] menu key, and the Trigger When setup menu will pop up on the right side of the screen:
Trigger Threshold Upper Limit
Trigger Threshold Lower Limit
Positive Slope Time
Summary of Contents for 4456 Series
