Ceyear 4456 Series, User Manual

Page: 15 / 267

Chapter II About the 4456 Series Digital Phosphor Oscilloscope
5
【
WaveGen
】
key to enable the waveform generator function.
Fig. 2.2 Software Login Interface of the 4456 Series Digital Phosphor Oscilloscope
Press down green power button
【 】
on the bottom left of the front panel for 2 s again, and the oscilloscope will
automatically exit the measurement application, and turn off the power supply.
Instructions:
In this manual, the buttons on the front panel are represented in the form of
【
XXX
】
, and XXX denotes the name of the key. The menu items
corresponding to the menu keys (hereinafter referred to as the menu) on the
display screen are represented in the form of
［
XXX
］
, and XXX denotes the
name of the menu.
2.2 Overview of front panel
This section will give a detailed description of the front panel of the 4456 series oscilloscope. You can become
familiar with the basic use of the instrument panel keyboard by reading this section. 0is the front panel of the 4456
series digital phosphor oscilloscope.
Front USB Ports
Power button
Screen
Display Area
Multipurpose
Setup Area
Feature Setup
Area
Run Control
Setup Area
Horizontal System
Setup Area
Trigger System
Setup Area
Vertical System
Setup Area
Input
Channels
Logic Analyzer Extended Ports
Function Generator Extended Ports 1kHz Calibration Signal
Fig. 2.3 Front Panel of the 4456 Series Digital Phosphor Oscilloscope
The front panel of the 4456 series digital phosphor oscilloscope is composed of the Power Button, Front USB