Chapter XI Protocol Analyzer (Option)
137
Frame Sync
Click [Frame Sync] key, and select Frame Sync trigger.
Data
Click [Data] key, and select Data trigger.
Fig. 11.188 Trigger Setup Menu
When the Audio type is I2S, LJ, RJ, click [Data] key, pop up the Audio Data Level2 Menu, and set the Trigger
When, Trigger On and Data.
When the Audio type is TDM, click [Data] key, pop up the Audio Data Level2 Menu, and set the Trigger When,
TDM Trigger Channel and Data.
Fig. 11.189 Audio Data Level2 Menu
Click [Trigger When] key, and select the required Trigger When in the popup Level3 Menu.
Fig. 11.190 Trigger When Setup Menu
Press down [Either Word] key, and select Either Word circularly: Left Word and Right Word.
Click [TDM Trigger Channel] key, and rotate the Multipurpose b to select the TDM Trigger Channel. It will be set
to 0 by default.
Click [Data] key, and input data by opening the data input keyboard.
Summary of Contents for 4456 Series
