Chapter XI Protocol Analyzer (Option)
79
Attention: When the channel threshold preset type is set to the User, click [Thresholds] menu key, and then rotate
the Multipurpose b to change the threshold. When selecting other preset type, the corresponding threshold will be
displayed on the menu key. If the type of threshold is greater/smaller than the max./min. threshold under this range,
the max./min. threshold will be displayed. If the preset type is not set to the User, click [Thresholds] menu key.
When rotating the Multipurpose b to change the threshold, the preset type will be changed to the User.
Include R/W in address
Click [Include R/W in address] menu key, and the Include R/W in address setup menu will pop up on the right
side of the screen:
Fig. 11.10 Include R/W in address Menu
Click [Yes] or [No] menu key to set Whether R/W is Included in I2C Address.
Bus display setup
Click [Bus Display] menu key, and the I2C Bus Display selection menu will pop up on the right side of the screen:
Fig. 11.11 I2C Display Setup Menu
Click [Display] menu key, and the Bus Display Setup Level3 Menu will pop up on the left side of the menu:
Fig. 11.12 I2C Display Setup Menu
Summary of Contents for 4456 Series
