Chapter XVIOscilloscope Probe (Option)
194
Table 16.3 P9551 Probe Parameters
Model
P9551
Bandwidth
500MHz
Termination
10M
Ω
±2% (10:1)
1M
Ω
±2% (1:1)
Input capacitance
10pF±2pF (10:1)
95pF±5pF (1:1)
Attenuation ratio
10:1, 1:1
Maximum input voltage
ACpk (1:1)
ACpk (10:1)
Capacitance compensation range
8-25pF
Probe length
140±2cm
Operating temperature
0-50
℃
Storage temperature
-20-75
℃
The maximum input voltage-frequency characteristic of the P9551 is shown in the figure below.
Fig. 16.9 P9551Probe Maximum Input Voltage-Frequency Characteristic Diagram
16.4
P9600A passive voltage probe
As a passive single end probe, the P9600A passive voltage probe has a bandwidth of 600MHz, fixed attenuation
of 10:1 and input impedance of 10 M
Ω
, which supports automatic identification functions. It can be purchased by
users. The option number is 4456-H15.
16.4.1 Operating Instructions
When the P9600A passive voltage probe is used, the input impedance of the oscilloscope is automatically set to
1M
Ω
, the probe type is automatically set to voltage, and the probe attenuation is automatically set to ×10. To
avoid the error caused by the probe connection, the probe should be connected to a probe calibration square wave
signal on the front panel of the oscilloscope, with about 1 kHz frequency and 3 Vpp amplitude, so as to keep flat
amplitude-frequency characteristics of the oscilloscope by adjusting the compensation capacitance of the probe.
Fig. 16.10 Schematic Diagram of Probe Compensation
The P9600A probe is equipped with accessories for easy testing. Please be familiar with the description of
relevant accessories before use to make better use of this product.
Over-compen
sation
Correct
compensation
Insufficient
compensation
Summary of Contents for 4456 Series
