Ceyear 4456 Series, User Manual

Page: 260 / 267

Appendix 1: Technical Specifications
250
CAN trigger and
analysis option S07
Trigger on start of frame, frame type, identifier, data, identifier and data, end of frame, missing ACK, or bit stuffing error on CAN
signals up to 1 Mb/s.
Signal rate: 10kbps~1Mbps
LIN trigger and analysis
option S08
Trigger on sync, identifier, data, identifier and data, wakeup frame, sleep frame, errors, up to 100 kb/s.
Signal rate: 800bps ~ 100kbps; protocol standard: 1.x, 2.x
FlexRay trigger and
analysis option S09
Trigger on start of frame, type of frame, identifier, cycle count, complete header field, data, identifier and data, end of frame or
errors, up to 10 Mb/s.
Signal rate: 2.5Mbps
、
5Mbps
、
10Mbps
Audio trigger and
analysis option S10
Trigger on word select, frame sync, or data. Maximum data rate for I
2
S/LJ/RJ/TDM is 10 Mb/s.
Signal rate:
≤
10Mbps; Protocol type: I
2
S, LJ, RJ, TDM
USB trigger and
analysis option S11
Trigger on sync active, start of frame, reset, suspend, resume, end of packet, token packet, data packet, handshake packet, special
packet, error. Low speed is 1.5Mbps and full speed is 12Mbps.
Signal rate: Low speed 1.5 Mbps, full speed 12 Mbps
MIL-STD-1553(Option
S12
）
Trigger on sync, word type, command word, data word, error and idle time, with a rate of 1Mbps
Signal rate: 1Mbps
Logical
analyzer
Options
Option H01
Digital channels 16
Threshold grouping Pod 1: D7 ~ D0, Pod2: D15 ~ D8
Threshold selection TTL (1.4 V), 5VCMOS (2.5 V), 3.3VCMOS (1.65 V), 2.5VCMOS (1.25 V), ECL (-1.3 V), PECL (3.7 V), user-defined
User-defined threshold
range
±20 V, with an increment of 10 mV
Threshold precision ± (150 mV+3% of threshold setting)
Maximum input voltage ±40 V peak-peak value
Input dynamic range ±10 V relative to the threshold
Minimum voltage
amplitude
500mVpp
Maximum input
switching rate
400MHz
Termination
100 kΩ±1%
Vertical resolution 1bit