Canon iR3570 Series, Service Manual

Page: 661 / 722

Chapter 16
16-35
ORG-LTRR Setting a special paper size that cannot be recognized by DF
This is targeted at LTR-R notified of by DF.
2
<Setting range>
0: LTR-R [Default]
1:G-LTR-R
2:A-LTR-R
3:OFFICIO
4:E-OFFICIO
5:EXECTIVE-R
6:LTR-R
ORG-LDR Setting a special paper size that cannot be recognized by DF
This is targeted at LDR notified of by DF.
2
<Setting range>
0: LDR [Default]
1:A-LETTER
2:LDR
ORG-B5 Setting a special paper size that cannot be recognized by DF
This is targeted at B5 notified of by DF.
2
<Setting range>
0: B5 [Default]
1: K-LEAGAL
2:B5
UI-BOX Setting whether or not to display the box screen of the operating section
2
<Setting range>
0: Do not display
1: Display [Default]
UI-SEND Setting whether or not to display the send screen of the operating section
2
<Setting range>
0: Do not display
1: Display [Default]
UI-FAX Setting whether or not to display the fax screen of the operating section
2
<Setting range>
0: Do not display
1: Display [Default]
UI-EXT Setting whether or not to display the extended screen of the operating section
2
<Setting range>
0: Do not display
1: Display [Default]
NEGA-GST Making additional setting about the pre-exposure sequence (excluding laser)
2
<Setting range>
0: Environmental control [Default]
1: Full
2: Slightly weak
3: Weak
NW-SPEED Selecting the data transfer speed at service network connection
2
<Setting range>
0: Auto [Default]
1: 100Base-TX
2: 100Base-T
STS-PORT Turning the TOT synchronous command communication port ON or OFF
The port for Inquiry/Response (synchronous) command communication in TUIF
over TCP/IP is turned ON or OFF.
2
<Setting range>
0: OFF [Default]
1: ON
CMD-PORT Turning the TOT asynchronous status communication port ON or OFF
The port for asynchronous status communication in TUIF over TCP/IP is turned ON
or OFF.
2
<Setting range>
0: OFF [Default]
1: ON
NS-CMD5 Limiting the use of CRAM-MD5 in SMTP authentication
This is set to limit the use of CRAM-MD5 in SMTP authentication
2
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-GSAPI Limiting the use of GSSAPI in SMTP authentication
This is set to limit the use of GSSAPI in SMTP authentication.
2
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-NTLM Limiting the use of NTLM in SMTP authentication
This is set to limit the use of NTLM in SMTP authentication.
2
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
COPIER > OPTION > BODY
Sub-item Description Level