Canon iR3570 Series, Service Manual

Page: 650 / 722

Chapter 16
16-24
16.5 FUNCTION (Operation/Inspection Mode)
16.5.1 COPIER
16.5.1.1 Copier List
0008-6670
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 /
<INSTALL>
T-16-34
<CCD>
T-16-35
COPIER > FUNCTION > INSTALL
Sub-item Description Level
TONER-S Stirring toner in the developer at installation
1
<Operating procedure>
1. Select an item to reverse its display.
2. "Check the Developer" is displayed.
Check that the developer connector is connected.
3. Press the OK key to start operation. The operation automatically stops after count-
down.
<Reference>
"Check the Developer" is displayed to prevent the connector from being disconnected
when the developer is replaced. Therefore, this message is not necessary when the
machine is shipped with the developer for installation.
STRD-POS Automatically adjusting the CCD read position at flow read
- This is necessary when DF is installed and when ADF is removed and mounted again.
1
<Operating procedure>
1) Select an item to reverse its display. Then press the OK key.
- Adjustment automatically starts and stops.
2) Since the value is updated in the service mode, COPIER>ADJUST>ADJ-
XY>STRD-POSenter the value into the service label.
CARD Installing and setting the card reader
1
<Operating procedure>
Enter the card number (1 to 2001) and press the OK key. (One thousand cards can be
used from the input card number.)
Then the card management information (department ID and PIN) is initialized.
E-RDS Setting whether or not to use Embedded RDS
1
<Setting range>
0: Do not use E-RDS (Default)
1: Use E-RDS (Sending all counter information)
RGW-PORT Specifying the port number of the dealer server for use by Embedded RDS
1
<Setting range>
1 to 65535 (Default: 433)
COM-TEST Checking connection to the dealer server for use by Embedded RDS
1
<Operating procedure>
1) Select an item to reverse its display. Then press the OK key.
2) The connection is checked and OK or NG is displayed.
OK: Connected, NG: Not connected
COM-LOG Displaying the detailed results of testing connection to the dealer server for use by
Embedded RDS
1
<Operating procedure>
1) Select an item to reverse its display. Then press the information display field.
Maximum log count: 30
Display contents: Date, time, error code, and error detail information (128 characters
max.)
RGW-ADR Specifying the URL of the dealer server for use by Embedded RDS
1
<Operating procedure>
1) Select an item to reverse its display. Then press the information display field.
2) The URL input screen is displayed. After input, press the OK key.
Default: http://a01.ugwdevice.net/ugw/agentif010
COPIER > FUNCTION > CCD
Sub-item Description Level
CCD-ADJ Automatically adjusting CCD
1
<Operating procedure>
1) Place about 10 or more sheets of standard white paper (whitest paper used by the
user, excluding color print paper) on the document table.
2) Select <CCD-ADJ> to reverse its display. Then press the OK key.
3) Adjustment is executed automatically (about 15 seconds). During adjustment,
<ACTIVE> is displayed at the upper right of the screen.
4) The LED lamp (for document lighting) lights twice and the automatic adjustment
ends with <OK> displayed on the screen.
5) Since all items are updated in this service mode (COPIER>ADJUST>CCD), enter
the values into the service label.