Canon iR3570 Series, Service Manual

Page: 662 / 722

Chapter 16
16-36
NS-PLNWS Limiting the use of PLAIN and LOGIN for SMTP authentication in an environment
of communication packet encryption
This is set to limit the use of PLAIN and LOGIN for SMTP authentication in an
environment where communication packets are encrypted
2
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-PLN Limiting the use of PLAIN and LOGIN for SMTP authentication in an environment
This is set to limit the use of PLAIN and LOGIN for SMTP authentication in an
environment where communication packets are not encrypted.
2
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
NS-LGN Limiting the use of LOGIN for SMTP authentication
This is set to limit the use of LOGIN for SMTP authentication in an environment
where communication packets are encrypted
2
<Setting range>
0: Dependent on the SMTP server [Default]
1: Do not use
MEAP-PN Changing the HTTP port number of the MEAP application
2
<Setting range> 0 to 65535 (Default: 8000)
SVMD-ENT Switching how to enter service mode
2
0: [User mode key] -> Simultaneous press of [2] and [*]-> [User mode] (Default)
1: [User mode key] -> Simultaneous press of [4] and [9]-> [User mode]
SSH-SW Turning the SSH server function ON or OFF
2
<Setting range>
0: OFF [Default]
1: ON
RMT-LGIN Turning remote login to the SSH server ON or OFF
2
<Setting range>
0: OFF [Default]
1: ON
RE-PKEY Turning the regeneration of the SSH server key ON or OFF
2
<Setting range>
0: OFF [Default]
1: ON
U-NAME Setting a user name for connection to the SSH server
2
Setting value:
Up to 8 characters (half-size alphanumeric)
U-PASWD Setting a user password for connection to the SSH server
2
Setting value:
Up to 8 characters (half-size alphanumerics)
DA-PORT Turning the TOT asynchronous status communication port ON or OFF
2
<Setting range>
0: CLOSE [Default]
1: OPEN (when DA is attached)
DA-CNCT Setting DA connection
2
<Setting range>
0: OFF [Default]
1: ON
CHNG-STS Setting the TOT status connection port number
2
<Setting range>
1 to 65535 [Default: 20010]
CHNG-
CMD Setting the TOT status connection port number
2
<Setting range>
1 to 65535 [Default: 20000]
MEAP-DSP Turning screen transition from MEAP to Native ON or OFF
2
<Setting range>
0: OFF (Transition to the Native screen) [Default]
1: ON (No transition to the Native screen)
ANIM-SW Turn MEAP application error/jam screen display ON or OFF
2
<Setting range>
0: OFF (Display warning screen) [Default]
1: ON (Do not display warning screen)
MEAP-SSL Setting the MEAP HTTPS port
2
<Setting range>
0 to 65535 (same as the setting of another network port system) [Default: 8443]
CCD-TYPE Setting the CCD unit type
2
<Setting range>
0: Initial CCD unit [Default]
1: Revised CCD unit
COPIER > OPTION > BODY
Sub-item Description Level