Canon iR3570 Series, Service Manual

Page: 630 / 722

Chapter 16
16-4
F-16-8
16.2 DISPLAY (Status Display Mode)
16.2.1 COPIER
16.2.1.1 Copier List
0007-9077
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 /
<VERSION>
T-16-1
COPIER > DISPLAY > VERSION
Sub-item Description Level
ROM version of each circuit board
Marking style<R-CON XX.YY> XX : Version number ,YY : Development control number
- <--.--> if no circuit boards are connected.
DC-CON
ROM version of the DC controller circuit board 1
R-CON ROM version of the reader controller circuit board 1
PANEL ROM version of the CPU circuit of the operator panel 1
POWER ROM version of the composite power circuit board 1
FEEDER ROM version of the DADF controller circuit board 1
SORTER ROM version of the finisher controller circuit board 1
FAX ROM version of the fax board 1
NIB Version of the network software 1
SDL-STCH ROM version of the saddle stitcher controller circuit board 1
MN-CONT ROM version of the main controller circuit board 1
DIAG-DVC ROM version of the self-diagnostic device 1
RUI Version of the remote UI 1
PUNCH Version of the punch unit 1
LANG-EN Version of the English language file 1
LANG-FR Version of the French language file 1
LANG-DE Version of the German language file 1
LANG-IT Version of the Italian language file 1
LANG-JP Version of the Japanese language file 1
JAVA-VM Version of JavaVM in bootable 1
MEAP Version of the MEAP Description on the hard disk 1
OCR-CN Version of the simple-font Chinese OCR 1
OCR-JP Version of the Japanese OCR 1
OCR-KR Version of the Korean OCR 1
OCR-TW Version of the full-font Chinese OCR 1
BOOTROM Boot ROM version of the main controller circuit board
Marking style: xx.yy_z
z indicates the boot ROM type.
1
LANG-CS Version of the Czech language file 2
LANG-DA Version of the Danish language file 2
LANG-EL Version of the Greek language file 2
xxxxx
yyyyy {aaaaa bbbbb}
toggles b and -
key: press it to stop the ongoing operation.
stores input value
numerical input range
value before change
Stop
key: press to clear an input. Clear
key: press to start copying without leaving service mode. Start
<ADJ-XY>
< 1/3 > < READY >
ADJ-X
input value
Display Adjust Function Option Test Counter I/O
PREV NEXT
+/- OK
Reverses to indicate
selection
ADJ-X