Canon iR3570 Series, Service Manual

Page: 619 / 722

Chapter 15
15-31
15.6.2 Error Code Detail (finisher, puncher)
0009-4183
iR2230 / / iR3530 /
T-15-19
E5F 0001 Saddle switch error The inlet cover switch
has been identified as
being open for 1 sec or
more after the start of
printing or the start of
initial rotation with the
following sensors
identifying their
respective covers as
being closed:
- inlet cover sensor
(PI9S)
- nt cover open/closed
sensor (PI2S)
- delivery cover sensor
(PI3S)
Or, the front over
switch (MS2S) or the
delivery cover switch
(MS3S) is open.
Inlet cover switch
(MS1S)/front cover
switch (MS2S)/
delivery cover switch
(MS3S) Check the inlet cover switch. Check
the inlet cover sensor. Check the
front cover open/closed sensor.
Check the delivery cover sensor.
Replace the finisher controller
PCB.
E5F 0002 Saddle switch error The front cover switch
has been identified as
being open from the
start of printing or the
start of initial rotation
with the following
sensors identifying
their respective covers
as being closed.
- inlet cover sensor
(PI9S)
- front cover open/
closed sensor (PI2S)
- delivery cover sensor
(PI3S)
- front cover switch
(MS2S)/delivery cover
switch (MS3S) Check the front cover switch.
Check the inlet cover sensor. Check
the front cover open/closed sensor.
Check the delivery cover sensor.
Replace the finisher controller
PCB.
E5F 0003 Saddle switch error The delivery cover
switch has been
identified as being open
after the start of
printing or the start of
initial rotation of the
host machine with the
following sensors
identifying their
respective covers as
being closed:
- inlet cover sensor
(PI9S)
- front cover open/
closed sensor (PI2S)
- delivery cover sensor
(PI3S)
- delivery cover switch
(MS3S) Check the delivery cover switch.
Check the inlet cover sensor. Check
the inlet cover sensor. Check the
front cover open/closed sensor.
Check the delivery cover sensor.
Replace the finisher controller
PCB.
Code Detail code Items Description Remedial action
E500 0001 Finisher
communication error Replace the finisher controller
PCB. Check the cable. Replace the
DC controller PCB.
E503 0003 Finisher internal
communication error There is an error in the
communication
between the finisher
and the punch unit. Replace the finisher controller
PCB. Replace the punch driver
PCB. Check the cable.
E505 0001
Finisher backup
memory error
There is an error in the
data stored in the
backup memory.
Turn off the main power, and check
the following: DC controller PCB
and finisher PCB wiring, 24V fuse.
Thereafter, turn on the main power.
0002 There is an error in the
punch unit EEPROM
data. Replace the punch driver PCB.
Replace the finisher controller
PCB.
Code Detail code Name Detection Remedy