Canon iR3570 Series, Service Manual

Page: 660 / 722

Chapter 16
16-34
SHARP Changing the sharpness level (Setting the central value)
2
<Setting range>
1 to 5 [Default: 3]
COTDPC-D Saving the toner (Potential (VD) low)
2
<Setting range>
0: No saving [Default]
1: Down about 10%
2: Down about 20%
3: Down about 30%
RMT-
LANG Changing the remote UI language from web
2
<Adjustment method>
Select a language code with the + or - key.
IFAX-LIM Limiting the number of output lines when a large amount of data has been received
by IFAX.
2
<Setting range>
0: No limit
0 to 999 [Default: 500]
DF-BLINE Taking corrective measures against a black line caused by dust on the platen at flow
read
2
<Setting range>
0: No corrective measures [Default]
1: Corrective measures
TEMP-TBL <Setting range>
0: OFF (Default) Normal mode
1: Mode in which FCOT is prioritized
This mode sets the pre-fixing rotation control (7 seconds) to OFF at a room
temperature of 14 to 17 deg C . (only for iR4570 series)
Condition: This is only valid when the Start button is pressed within 5 seconds after
a copy is made.
<Note>
This is only valid for iR3530/3570/3570F/4530/4570/4570F.
2
FIX-SMR Taking corrective measures against smearing at fixing
2
<Setting range>
1: Lower the absolute value of developing bias Vdc by 20 V
2: Lower the absolute value of Vdc by 40 V
3: (Reserved)
FAN-EXTN Setting the post-job fan extension mode
2
<Setting range>
0: OFF [Default]
1: ON
SMTPTXP
N Changing the SMTP send port number
2
<Setting range>
0 to 65535 (units of 1) [Default: 25]
SMTPRXP
N Changing the SMTP send port number
2
<Setting range>
0 to 65535 (units of 1) [Default: 25]
POP3PN Changing the POP receive port number
2
<Setting range>
0 to 65535 (units of 1) [Default: 110]
RUI-DSP Setting whether to display a copy screen for RUI (Option switch conforming to the
Disability Law)
2
<Setting range>
0: Do not display [Default]
1: Display
ORG-LGL Setting a special paper size that cannot be recognized by DF
This is targeted at LGL notified of by DF.
2
<Setting range>
0: LEGAL [Default]
1: FOOLSCAP
2: A-FOOLSCAP
3: FORIO
4: G-LEGAL
5: OFFICIO
6: E-OFFICIO
7: A-OFFICIO
8: B-OFFICIO
9: A-LEAGAL
10: M-OFFICIO
11: LEGAL
ORG-LTR Setting a special paper size that cannot be recognized by DF
This is targeted at LTR notified of by DF.
2
<Setting range>
0: LTR [Default]
1:G-LTR
2:A-LTR
3:EXECTIVE
4:LTR
COPIER > OPTION > BODY
Sub-item Description Level