Canon iR3570 Series, Service Manual

Page: 567 / 722

Chapter 14
14-39
14.2.10.2.6 Text recognized in PDF (OCR) mode
0010-0058
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /
[ Manual-related ]
Description
Text recognized in the PDF (OCR) mode follows the limitations below.
1. Font
Helvetica, Courier New, Time New Roman
2. Font size
6 to 72 pt
3. Limitations
130 characters per lines (100 lines max)
14.2.10.2.7 Wants to use text extracted from scanned document as name of document (file) when sending in PDF (OCR) mode: FAX
transmission
0010-0059
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /
[ Manual-related ]
Description
In the Send screen, press [Send Settings] button and [Doc Name OCR] button in sequence, and then press [Start] key. The first 24 characters (default) of the
first text block extracted from the first page of the scanned document will be automatically set as the document name. The number of the characters extracted
as the document name is changeable between 1 and 24 characters in user mode [Communications Settings > TX Settings under Common Settings >
PDF(OCR) Settings > Num. of Char. for Doc Name Setting].
14.2.10.2.8 DADF-N1: Scanning time in different size originals mode
0010-4377
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /
[ Manual-related ]
Description
When two single-sided different size originals, which, for example, are A3- and A4-size originals, are copied at the 100% scaling ratio to make two single-
sided prints, the length of time that the DADF-N1 needs for scanning such originals varies based on the mode ("Same Width" or "Different Width") selected
in the original type specification screen for the different size originals mode. The length of scanning time needed in "Same Width" mode is shorter than that
in "Different Width". This is because of the following scanning operation:
-In case "Same Width" is selected
The DADF-N1 picks up an original; when reading ends, it delivers the original as it is. (Normal rotation pickup/Delivery)
- In case "Different Width" is selected
The DADF-N1 feeds an original idly to check the size, and reverses it; when reading ends, it delivers the original as it is. (Idle feeding/Reverse pick-up/
Delivery)
14.2.10.2.9 How to expand Universal Send Kit-B1
0010-4386
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /
[ Case in the field ]
Description
When expanding the universal send kit-B1, follow the steps below.
1. Access the License Management System using the following URL: http://www.canon.com/lms/ir/
2. In the LMS screen, enter the 24-digit number indicated on the License Access Number Certificate and the serial number of the machine (e.g., ABC01234)
and then copy the 24-digit number shown on the Web browser screen in the space given for the purpose on the License Access Number Certificate sheet.
Note: Be sure to double-check the number to avoid an error. Be sure that the user is aware of the importance of the License Access Number Certificate and
that it must be stored away in a safe place.
3. In user mode [System Settings > License Registration], enter the 24-digit number obtained in step 2 and then press [Start].
4. Press and hold the control panel switch for 3 seconds or more, press [Start] on the LCD, turn the main power switch OFF in accordance with the instruction
on the LCD, and then turn the main power switch ON again more than 10 seconds later.
5. When the machine has started up, press the counter key on the control panel and then select [Device Configuration] to make sure that the name of this kit
is displayed as one of software options.
14.2.10.3 FAQ on G3FAX Specifications
14.2.10.3.1 How to display FAX error codes on Activity Report
0009-2410
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N / / iR4570N / iR2230 / / / iR3530
[ Manual-related ]
Field Remedy
In service mode [FAX> SSSW> SW01> bit0], set it at "1".
14.2.10.3.2 How to output System Dump List
0009-2411
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N / / iR4570N / iR2230 / / / iR3530
[ Manual-related ]
Field Remedy
In service mode [FAX> REPORT> DUMP], press the OK key to output the system dump list.
14.2.10.3.3 How to print FAX Activity Report when necessary
0009-2425
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N / / iR4570N / iR2230 / / / iR3530
[ Manual-related ]
Field Remedy
When you want to print the FAX Activity Report at a timing other than the specified times or every 40 transmissions,
select [Send screen > System Monitor > Fax > Log] and press "Print List."