Canon iR3570 Series, Service Manual

Page: 610 / 722

Chapter 15
15-22
- Finisher-S1
T-15-13
15.4.3 Jam Code (finisher-related)
0009-4184
iR2230 / / iR3530 /
- Finisher-S1
T-15-14
15.4.4 Jam Code (ADF-related)
0008-0981
iR2270 / iR2870 / iR3570 / iR4570 / / / /
T-15-15
1387 saddle power-on jam PI8,
PI11,PI17,PI
18,PI19,PI2
0,PI22
1488 saddle door open jam PI3, PI9,
PI32
Code Jam Sensor notation
1011 inlet path sensor feed delay jam PI5
1121 inlet path sensor feed stationary jam PI5
1F81 stack delivery jam PI1
1506 staple jam STP
1307 power-on jam POWER ON
1408 door open jam (joint) DOOR
1644 punch hole jam SR2
1347 punch power-on jam LED7/PTR7
Code Jam Sensor notation
1011 inlet path sensor feed delay jam PI5
1121 inlet path sensor feed stationary jam PI5
1F81 stack delivery jam PI1
1506 staple jam STP
1307 power-on jam POWER ON
1408 door open jam (joint) DOOR
1644 punch hole jam SR2
1347 punch power-on jam LED7/PTR7
Code Jam Sensor notation Description
0003 registration sensor delay PI2 The registration sensor does not detect paper
with 1.5 sec after pickup.
At time of reversal, the registration sensor
does not detect paper even after the read
motor has rotated for a specific period of
time.
0004 registration sensor stationary PI2 After the registration sensor has gone on, it
does not go off even when the paper has been
moved for 500 mm (700 mm if in extra
length mode).
0005 read sensor delay PI2,PI3 The read sensor does not detect paper even
when the feed motor has rotated for a
specific period of time after it has received
the pickup request signal from the reader
unit.
0006 read sensor stationary PI3 After the read sensor has gone on, it does not
go off even when the paper has been moved
500 mm (700 mm if in extra length mode).
0007 delivery sensor delay PI3,PI4 The delivery sensor does not detect paper
even after the read motor has rotated for a
specific period of time in response to the read
request signal from the reader unit.
0008 delivery sensor stationary PI4 After the delivery sensor has gone on, it does
not go off even after the paper has been
moved 500 mm (700 mm if in extra length
mode).
0044 1st sheet registration sensor
stationary PI2 The 1st original has been identified as a
registration sensor stationary jam.
0045 1st sheet read sensor delay PI2,PI3 The 1st original has been identified as a read
sensor delay jam.
0046 1st sheet read sensor
stationary PI3 The 1st original has been identified as a read
sensor stationary jam.
0047 1st sheet delivery sensor
delay PI3,PI4 The 1st original has been identified as a
delivery sensor delay jam.