Canon iR3570 Series, Service Manual

Page: 665 / 722

Chapter 16
16-39
Software counter specifications
100 - 199: Total
200 - 299: Copy (001 to 099 added in case of shortage)
300 - 399: Print
400 - 499: Copy and print
500 - 599: Scan
600 - 699: Box print
700 - 799: Receive print
800 - 899: Report print
900 - 999: Send
Explanations of symbols and terms in the table
- YES: Counter valid in this machine
- Large size: Paper greater than B4
- Small size: Paper of B4 or smaller
- Counter Description: Numerals 1 and 2 indicate the counts of large size paper.
In service mode (COPIER>OPTION>USER>B4-L-CNT), B4 or greater can be set as the large size.
- Total A: Total excluding local and remote copies
- Total B: Total excluding local and remote copies and box prints
- Copy: Local and remote copies
- Copy A: Local and remote copies and box prints
- Print: PDL, report, and box prints
- Print A: PDL and report prints
DPT-ID-7 Registering the department ID and entering 7 digits for authentication
2
<Setting range>
0: Conventional [Default]
1: 7-digit input
RUI-RJT Disconnecting the HTTP port from RUI by three authentication failures
2
<Setting procedure>
0: Invalid [Default]
1: Valid
CTM-S06 Setting whether or not to erase the password from the export file of the file send
address
2
<Setting range>
0: Do not erase the password from the export file. [Default]
1: Erase the password from the export file.
CTM-S07 Setting whether or not to erase the RUI address display or the send password
source display on the edit screen
2
<Setting range>
0: Do not erase the send password source display on the edit screen. [Default]
1: Erase the send password source display on the edit screen.
FREG-SW Setting whether or not to display the free section of the MEAP counter (SEND)
2
<Setting range>
0: Do not display [Default]
1: Display
MEAPSAFE Turning the MEAP Safe mode ON or OFF
2
<Setting range>
0: OFF [Default]
1: ON (Safe mode)
IFAX-SZL Enabling or disabling the send size limit in IFAX transmission (not via server
only)
2
<Setting range>
0: Send size limit enabled (via server/not via server)
1: Send size limit disabled (not via server only) [Default]
IFAX-PGD Setting whether or not to permit split send in pages (only beyond the upper limit
of the send data size)
2
<Setting range>
0: Do not permit split send in IFAX Simple mode transmission [Default]
1: Permit split send in IFAX Simple mode transmission
AFN-PSWD Limiting access in User mode
2
<Setting range>
0: OFF (Transition to the User mode screen with no password request)
[Default]
1: ON (Transition to the User mode screen after password matching)
PTJAM-RC Turning PDL jam recovery ON or OFF
2
<Setting range>
0: OFF (Do not recover)
1: ON (Recover) [Default]
SLP-SLCT Setting whether or not to use a network application supporting BW2 (CL1)
2
<Setting range>
0: Do not use (1w(2w) sleep possible) [Default]
1: Use (1w(2w) sleep not possible) [Default]
PS-MODE Setting PS internal mode
2
<Setting range>
0 to 65535
0: Not compatible [Default]
1: PS Type 3 Halftone command compatible (conventional) (Dither growth
forward and reverse)
2 to 65535: Reserved
COPIER > OPTION >USER
Sub-item Description Level