116
ZE-855A,856A
7. USING THE OPERATION PANEL
7. VERWENDUNG DER BEDIENUNGSTAFEL
7. UTILISATION DU PANNEAU DE COMMANDE
7. USO DEL TABLERO DE CONTROLES
■
Automatic thread trimming function (856A only)
•
When setting fixed stitch/name label sewing, if the
thread trimming key
r
is pressed so that the indicator
t
illuminates, the thread is trimmed automatically af-
ter the set number of stitches have been sewn when
the treadle is depressed continuously.
(When attaching name labels, the thread is trimmed
after each cycle.)
•
When the fixed stitch/name label function is canceled,
the automatic thread trimming function is also can-
celed, and the thread trimming indicator
t
switches
off.
■
Automatic sewing (AUTO) function
•
When setting fixed stitch/name label sewing, if the
AUTO key
y
is pressed so that the AUTO indicator
u
illuminates, the number of setting stitches is sewn au-
tomatically simply by depressing the treadle once.
•
When the fixed stitch/name label function is canceled,
the AUTO function is also canceled, and the AUTO in-
dicator
u
switches off.
u y
t r
<Fixed stitch sewing>
<Name label sewing>
Start point/end point
(Automatic thread trimming)
F
E
F
E
E
(Automatic thread timing)
<Example: Fixed stitch sewing>
Start backtack zigzag width
End backtack zigzag width
Number of start
backtack stitches
E= Number of fixed
E=
stitches
Number of end
backtack stitches
1369M
1368M
1472M
1367M
■
Combining fixed stitches/name label sewing with
backtacking
The illustration shows an example of stitch combinations
using backtacking.
Note:
The set number of fixed stitches are sewn and sewing
then stops automatically, regardless of the zigzag stop
position setting.
