178
ZE-855A,856A
13. STANDARD ADJUSTMENTS
13. STANDARDEINSTELLUNGEN
13. REGLAGES STANDARD
13. AJUSTES ESTANDARES
*1:Items to the left of the "/" are when the correction sewing indicator is on, and to the right are when it is off.
■
Memory switches 01~18
01
ON
(Cannot be changed)
OFF
02 Interlock release when treadle is depressed
ON
Forward treadle operations enabled when depressing treadle
backward (during thread trimming / needle rising)
OFF Forward treadle operations disabled when depressing treadle
backward (during thread trimming / needle rising)
03
ON
(Do not change)
OFF
04 Independent backtack speed setting
ON
Backtacking speed is not limited by panel setting speed
OFF Backtacking speed is limited by pannel setting speed
05
ON
(Do not change)
OFF
06 Increased piercing force
ON
No increased piercing force operation
OFF Increased piercing force operation
07
ON
(Do not change)
OFF
08
ON
(Do not change)
OFF
11 No thread trimming/thread wiping
ON
Operation selection possible using thread trimming / needle raising key
OFF Thread trimming and thread wiping operate
12 Presser foot status after thread trimming
ON
Presser foot rises at neutral position
OFF Presser foot lowered at neutral position
13 Presser foot status when treadle stopped
ON
Raised
at neutral position
OFF Lowered
14 Actuator function
ON
Operates as thread trimming switch
OFF Normal functioning
15 Decelerated stop control
ON
No decelerated stop control
OFF Control prevents extra stitch from being sewn
16
ON
(Do not change)
OFF
17 Half-stitch correction
ON
One stitch forward correction/Half-stitch forward correction (*1)
OFF One stitch forward correction/No correction (*1)
18 Reverse correction
ON
One stitch forward correction/Reverse correction (*1)
OFF One stitch forward correction/No correction (*1)
■
Memory switches 21~28
21
ON
(Do not change)
OFF
22
ON
(Do not change)
OFF
23
ON
(Do not change)
OFF
24
ON
(Do not change)
OFF
25
ON
(Do not change)
OFF
26 End backtacking movement control
ON
Moves to end backtacking without decelerating to low speed
OFF Decelerates to low speed, and then moves to end backtacking
27
ON
(Do not change)
OFF
28
ON
(Do not change)
OFF