5 Operating the pump controller
18/02/2021
bplogic intelligent pump controller
237
5.8 Shutting down the pump controller
To switch off, disconnect the power supply.
Hardware and software are not damaged by this hard shutdown.
Continuous operation
The pump controller is designed for continuous operation. Only
shut down pump controllers for extended operational breaks or
maintenance and troubleshooting work.
5.9 Re-commissioning after an extended shut-
down
If there is a power interruption, the pump controller can run the clock for up to 30
days thanks to its own energy buffer.
A pump controller that has been de-energised for more than 30
days is considered to have been shut down for an “extended
period”.
1.
Observe
section
on page
2.
If no NTP server via which the internal clock can obtain the current time is se-
lected (
section
on page
), set the calendar
and the clock to the current date and time manually.
Section
on page