BRINKMANN PUMPS Bplogic, Operating Manual, Page: 100 / 291

5 Operating the pump controller
100 bplogic intelligent pump controller 18/02/2021
5.4 Primary functions
This section describes the possible primary functions.
The primary function defines the main function of the pumps connected to the appli-
cation module, e.g. pressure regulation.
Primary functions can be expanded with secondary functions.
The primary functions that are available to you depend on the pump controller con-
figuration file that is used. Only the manufacturer can edit the configuration file.
If there are problems with the configuration, contact customer
service:

To do this, provide the current configuration file

section 7.2.1
“
Backup and restore preparation
”
on page
249 .
Or:

Have the pump
controller’s order number and serial number
to hand.
 “Customer service”
on page 8
5.4.1 Executing adjustment mode with one pump
In adjustment mode, constant frequency target values are specified for the fre-
quency converter, which can be used to operate the pumps.
Prerequisites:
The corresponding application module is set up and selected:


Section 5.3.1
“Checking the assignments to application modules”
on
page 92


Section 5.7.3
“Using the application overview during operation”
on
page 226
1. Check whether the required application module is set appropriately for the
current task (e.g. to convey medium with a defined pressure or throughput).