BRINKMANN PUMPS Bplogic, Operating Manual, Page: 159 / 291

5 Operating the pump controller
18/02/2021 bplogic intelligent pump controller 159
After the forecast period has expired, the pump controller displays a warning that
reminds you to perform another wear measurement.

Most settings are pre-configured by the manufacturer.

Check that the settings are correct before commission-
ing for the first time.

If there are problems with the configuration, contact
customer service:

When doing so, provide the current configuration file

Section 7.2.1
“Backup and restore
preparation
”
on page 249.
Or:

Have the pump controller’s order number and serial
number at hand.
 “Customer service”
on page 8 .
1. Tap in the navigation bar.

The
“Configuration”
menu opens.
2. In the
“Configuration” menu, tap “Applications”
.

“Configuration – Applications”
opens.
3. In
“Configuration– Applications”, tap “Secondary functions”
.
 “Configuration – Applications – Secondary functions”
(Fig. 89) opens.

C
o
n
fi
g
_
Se
co
n
d
a
ry
-f
u
n
ct
io
n
s
-0
1
.p
n
g
Fig. 89:
“
Secondary functions
”
4. Tap
“Manufacturer parameters - Wear detection”
(Fig. 89/1).
5. Tap wear detection for the required screw spindle pump, e.g.
“Wear detec-
tion
2”
(Fig. 89/2).