BRINKMANN PUMPS Bplogic, Operating Manual, Page: 253 / 291

7 Performing maintenance
18/02/2021 bplogic intelligent pump controller 253
6. Keep the backup safe.
Restoring
7. Use the version info (Fig. 173/1) to check whether a current version is installed.
8. Use
“
Browse
”
(Fig. 173/3) to select the file path for the current version.
9. Press
“Start”
to start restoring.
10. After restoring is complete, eject the source storage device and remove it.
11. Closing the service access:

Section 5.6.4
“
Setting WLAN module parame-
ters
”
on page 204, handling step 4 and handling step 5.
For information regarding ejecting a removable storage device,
see

section 5.7.2
“
Ejecting the removable storage device
safely
”
on page 224 .
7.2.3 Backing up and updating the system software
The following steps describe how you can back up and update the entire system
software, including the application software, the setting parameters and the operat-
ing system.
Backing up and updating the application software can take up to 30 minutes.
Prerequisites:

Preparation in accordance with

section 7.2.1
“Backup and restore
prepa-
ration
”
on page 249 has been completed.

The USB storage medium that is used has the “BOOT” designation.
1. In
“Configuration – System – Backup & Restore”
, tap
“System software”
.
 “Configuration – System – Backup & restore – System software”
(Fig. 176)
opens.